Filter Options
Required*
Filter

Fluid Power Cylinders & Actuators in United States

Morin Actuator Inc photos
Morin Actuator Inc, Pelham
Pelham / Alabama / United States
0.0
Morin Actuator manufactures pneumatic and hydraulic quarter-turn actuators utilizing manufacturing and corrosion resistant materials to produce actuators that are recognized in the industry for their long life. Integral options include partial stroke test devices to validate emergency shutdown valves and lockout devices for employee and process safety. Morin products are used successfully in a wide variety of flow control applications including pulp an paper, chemical processing, pharmaceutical, food & beverage, oil & gas, textile, municipal water and waste and power. The company was founded in 1989 in Birmingham, Ala. In 1997, Tyco International acquired Keystone International, which included the Morin Actuator division.
Detail
Motion Systems Corporation photos
Motion Systems Corporation, Eatontown
Eatontown / New Jersey / United States
0.0
Motion Systems Corporation, located in Eatontown, N.J., manufactures one of the industrys largest selection of electromechanical linear actuators. Its products include epicyclic ball screws with integral freewheeling stroke ends; tandem drive actuators; and ball drive pedestal actuators. Its products are used in applications, such as medical equipment, dental chairs, handicap equipment, material handling equipment, valve operators and ergonomic systems. The company also provides full technical support for its customers applications.
Detail
Electromech Technologies photos
Electromech Technologies, Wichita
Wichita / Kansas / United States
0.0
In 1968, Electromech Technologies designed and developed the first DC motor for horizontal stabilizers and flaps for general navigation applications. The company specializes in the manufacture and overhaul of AC/DC motors, blowers and actuators for the aerospace and defense industries. Electromech Technologies has in-house engineering resources to design, develop, test, manufacture and support all electromechanical components available. Examples of its design and testing capabilities include: advanced engineering design capability for customized high performance rotating equipment and tools; extensive in-house environmental testing for altitude, temperature, stress and vibration, plus microprocessor control of performance and life testing; high-energy motors with rare Earth samarium cobalt and neodymium iron borbon permanent magnets; AutoCAD with mechanical desktop for solids modeling; finite element analysis through the use of COSMOS/M; and propriety motor design programs for AC and DC motors and blowers. Electromech Technologies is located in Wichita, Kan., and is a subsidiary of McKechnie Aerospace.
Detail
Copper State Fluid Power photos
Copper State Fluid Power, Tucson
Tucson / Arizona / United States
0.0
Amenities
Detail
R & M Fluid Power Inc photos
R & M Fluid Power Inc, Youngstown
Youngstown / Ohio / United States
0.0
R & M Fluid Power Incorporated is a cylinder specialist. Located in Youngstown, Ohio, it serves industries that include steel mills, mining, heavy industry, plastics and military, among others. The company has engineering capabilities, such as rotating, new standard, special and metric cylinders, high pressure-6000 PSI and double acting telescopic, including others. R & M Fluid Power Incorporated designs mill type hydraulic/air cylinders. The company manufactures or re-manufactures most parts and replaces some, including new tube-hi stress 4140, new rod-induction hardened chrome plated, new piston-ductile iron or bronze overlay steel, etc.
Detail
Custom Hydraulic & Machine Inc photos
Custom Hydraulic & Machine Inc, Kent
Kent / Washington / United States
0.0
Custom Hydraulic & Machine, Inc started business in 1965 and serves its customers with many hydraulic hose fittings such as marine hose end fittings, hose assemblies, half clamps, segments, flanges and a wide variety of other products. We are a manufacturing firm that has been producing hydraulic marine fittings for Government and Commercial use for the last 40+ years.
Detail
Western Integrated Tech Inc photos
Western Integrated Tech Inc, Portland
Portland / Oregon / United States
0.0
Western Integrated Technologies is a manufacturer and integrator of fluid power and electronic systems. The company has air, cartridge, ball and directional control valves available in various specifications. It offers pumps, motors, cylinders and grippers in several configurations. Western Integrated Technologies provides a range of shafts, boosters, actuators and pressure sensors. The company features filters, pump drives and input adapters. It also sells gauges, brakes, clutches and piston pumps in a variety of sizes. Western Integrated Technologies offers hoists, pressure switches, accumulators and lube devices to its customers. The company serves the marine, lumber, aerospace and power generation industries. Additionally, it provides maintenance, installation and 24-hour emergency services. Headquartered in Bellevue,Wash., Western Integrated Technologies maintains a location in Portland, Ore.
Detail
Bernell Hydraulics photos
Bernell Hydraulics, Rancho Cucamonga
Rancho Cucamonga / California / United States
0.0
A full service Fluid Power Distributor, Manufacturer and Systems Designer, Hydraulic Repair & Service Center, Field Service Specialists, 24 Hr. Service Available, ParkerStores, Industrial Rubber Products.
Detail
Waltco Lift Corp photos
Waltco Lift Corp, Tallmadge
Tallmadge / Ohio / United States
0.0
Waltco Truck Equipment is a manufacturer of hydraulic lift gates and custom hydraulic cylinders for the transportation industry. The company manufactures more than 50 standard liftgate models, including rail-type, conventional, flipaway, level lift, side loader and pickup models. Its cylinder division provides custom-welded hydraulic cylinders for the materials handling and transporation industries. The company maintains its headquarters in Tallmadge, Ohio.
Detail
Dynatorque Inc photos
Dynatorque Inc, Muskegon
Muskegon / Michigan / United States
0.0
Since 1974, DynaTorque has been manufacturing manual gear operators and specialty products for use with automated valves. From its origins as the Westran Company, DynaTorque has expanded its product line to include valve actuators, handwheels and specialty products. DynaTorque s products are sold through a network of authorized distributors located throughout the United States. The company is located in Muskegon, Mich., and is a member of the Hines Corporation, a privately held management company in Muskegon that oversees eight manufacturing facilities in the Midwest and Texas, along with a distributorship in New York. Its companies manufacture a wide range of products, including valves, springs, gasoline dispensers and boilers.
Detail
Midway Manufacturing Inc photos
Midway Manufacturing Inc, Kinsley
Kinsley / Kansas / United States
0.0
Midway Manufacturing Inc provides Cylinder Head Casting & Piston, Ground and Polished Chrome Plated Rods to the Kinsley, KS area.
Detail
FleetPride photos
FleetPride, Mankato
Mankato / Minnesota / United States
0.0
At FleetPride in Mankato, MN, we are here for you. With 260,000+ heavy-duty truck and trailer parts, 260+ branch locations, 200+ repair and maintenance centers, and the industrys largest distribution network, FleetPride is here to support you and your business to ensure that you are Ready for the Road Ahead.
Detail
R & N Hydraulics photos
R & N Hydraulics, Bryant
Bryant / Arkansas / United States
0.0
Detail
West Craft Manufacturing photos
West Craft Manufacturing, Alto
Alto / Texas / United States
0.0
West Craft Manufacturing Inc. is a one of the leading manufacturers of hydraulic and pneumatic cylinders in the United States. Based in Alto, Texas, the company specializes in the design and production of custom, cataloged as well as standard cylinders. It also provides a series of services in inventory control and warehouse management, field service, engineering support and custom-painting/product identification, to name a few. It caters to the oil and gas, construction, agriculture, marine and steel production industries.
Detail
United Standard Industries photos
United Standard Industries, Glenview
Glenview / Illinois / United States
0.0
Within our 35, 000 square foot facility we produce some of the most complex parts and assemblies in the United States. With a focus on quality and customer satisfaction, USI has successfully grown to become one of the finest machine shops in the world. We are certified to ISO 9001: 2008 by Eagle Registrations, Inc A key element to our success is diversity. Over the years we have machined parts for the pneumatics, defense, automotive, medical, and related industries. We manufacture our products from ferrous and non-ferrous materials, bar stock, castings, forgings, plastics, rod, and sheet. What makes any successful operation run is the people involved in the every day processes. Our team attitude coupled with our low turnover of employees enables us to work together cohesively in working towards our goal of complete customer satisfaction.
Detail
AGI American Grippers Inc photos
AGI American Grippers Inc, Trumbull
Trumbull / Connecticut / United States
0.0
Manufacturer of Pneumatic Grippers, Robotic Grippers, Pneumatic Linear Actuators, Pneumatic Rotary Actuators, Robotic Tool Changers.
Detail
Zaytran Inc photos
Zaytran Inc, Elyria
Elyria / Ohio / United States
0.0
ZAYTRAN offers gripper technology for a wide range of applications, such as welding, grinding, machining, epitaxial wafer fabrication and food processing. The company s customer base is comprised of automation and hydraulics integrators who work in industries that range from hard disk fabrication to aircraft manufacturing. It also develops automotive locating pins. ZAYTRAN s product line includes Magnum and X-ray grippers. The company incorporates corrosion resistant materials in its production processes. Its clients include Ford, Daimler-Chrysler and General Motors. ZAYTRAN was founded in 1980 to manufacture large-capacity hydraulic valves. The company is 9001 certified by the International Standards Organization. Its headquarters is located in Elyria, Ohio.
Detail
J E Myles Inc photos
J E Myles Inc, Troy
Troy / Michigan / United States
0.0

J.E. Myles is an engineering firm that provides a variety of testing services for manufacturing companies. Some of its services include contamination analysis, shock and transient studies and environmental validation.   

Detail
Hydraulic Specialists Inc photos
Hydraulic Specialists Inc, Somerset
Somerset / Kentucky / United States
0.0
Detail
Rupes Hydraulics photos
Rupes Hydraulics, San Marcos
San Marcos / California / United States
0.0
For more than 30 years, Rupe s Hydraulics has been providing hydraulic equipment and components for the fluid power industries throughout the United States. Based in San Marcos, Calif., it has a 35,000-square-foot facility. The firm offers a range of products, such as motor starters, air valves, volt generators, industrial pumps, gear pumps and lube equipment, among others. Rupe s Hydraulics provides products through some of the leading manufacturers, including American Industrial Heat Transfer Inc., Gems Sensors & Controls, Anchor Flange and Custom Hoists Inc., to name a few.
Amenities
Detail

Speed Links